
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-10 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the forward end-position anywhere between 65 and 75 mm directly on your equipment, eliminating the need for shims or part swaps during changeovers.
This model features a space-saving riveted body that minimizes axial mounting depth where larger profile cylinders cannot fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Operating at speeds of 30-500 mm/s, this SKU is supplied without a piston magnet and therefore cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 65-75 mm extend stop on machining fixtures to compensate for tool wear without fabricating new spacer shims.
Set precise end-stops during prototype assembly stations, safely testing kinematic motion before locking down final dimensions.
Stepping down to an SDAJ20 yields 157.1 N, whereas stepping up to an SDAJ32 provides 402.1 N.
This specific configuration includes a 75 mm stroke with a 10 mm adjustment window, an M5x0.8 port, and a female M5x0.8 rod-end thread. It lacks the -S magnet option, so position sensing is unavailable on this unit. Remember that the fixed bumper only decelerates the stroke end; a plain cylinder does not hold a load upon air loss or valve centering. For suspended or vertical loads requiring fail-safe holding, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the R (M8x1.25) screw mechanically shortens the forward end-position by up to 10 mm, giving a usable extend range of 65-75 mm. It sets the stop without altering force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.