
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-10S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M8x1.25) screw lets you dial the outward stroke anywhere between 65 and 75 mm directly on the machine, eliminating the need for shims or part swaps.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic switches for precise position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 65 to 75 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Adjust the outward reach by up to 10 mm to set exact contact pressure on varying box widths, relying on the fixed NBR bumper for end deceleration.
Choose this specific unit if your setup requires on-site stroke tuning within the 10 mm window.
Confirm the bore, 75 mm maximum stroke, 10 mm adjustability, M5x0.8 port, and the female M5x0.8 rod-end thread. The -S magnet enables switch integration, but remember a plain cylinder does not hold its load on air loss or valve centering. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The M8x1.25 R screw shortens the extend stop by up to 10 mm, giving a usable 65-75 mm range. The built-in -S magnet works with AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.