
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-20S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X75-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the forward stroke down by 20 mm directly on the machine, yielding a usable extend range of 55 to 75 mm without swapping shims or parts.
Built with a short riveted body, this unit saves axial mounting depth where a round-body or profile cylinder will not fit. It carries a fixed NBR bumper at each end to decelerate the stroke end, which is not an adjustable air cushion. The -S option provides a built-in piston magnet for AirTAC reed or electronic switches, and the 10 mm rod uses an M5x0.8 female rod-end thread.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X75-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke on the fly during product format changes without removing the cylinder, using the 20 mm window to accommodate varying package widths on the line.
Tune the mechanical stop for different carton depths, relying on the fixed NBR bumper to absorb the end shock while the magnet confirms the retracted position.
Choose the 25 mm if you need moderate force with on-site stroke tuning.
Confirm the 75 mm maximum stroke, 20 mm adjust window, and M5x0.8 air port for your setup. The -S magnet enables position sensing, but a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts. For a held load without live pressure, specify an external rod lock or a pilot-operated check valve. The male rod thread is absent here; it uses a female M5x0.8 thread.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The R (M8x1.25) screw shortens the extend stop by up to 20 mm, giving a 55 to 75 mm range. The -S option adds a piston magnet for AirTAC reed or electronic switches; the screw itself is a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.