
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-30B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X90-30B is a compact double-acting double-rod cylinder built for applications requiring a precise extend end-position. Its short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. An external M8x1.25 adjuster screw lets you dial the extend stop down by up to 30 mm, providing a usable range of 60 to 90 mm directly on the machine.
This SKU features a male-thread M8x1.25 piston rod for secure tool mounting. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion. Note that this specific unit lacks a piston magnet and cannot take a magnetic switch.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 60-90 mm extend stop on the fly to find the exact contact point for delicate probes without machining new spacers.
Swap product families and rotate the M8x1.25 adjuster screw to alter the extend depth, cutting setup time from minutes to seconds.
When sizing this 25 mm bore, evaluate your force requirements both ways.
Choose this model if your assembly requires on-site stroke tuning during commissioning or frequent changeovers. The male M8x1.25 rod thread and M5x0.8 air port are fixed by the bore. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the stroke end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s.
Turning the R (M8x1.25) screw shortens the extend stroke by up to 30 mm, giving a usable range of 60 to 90 mm. The screw acts purely as a mechanical stop and does not alter the force. It does not lock the piston mid-stroke; for load holding without air pressure, you need an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.