verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke110 mm
  • Adjustable range35–110 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$68.82 $76.32Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75

The AirTAC SDAJ32X110-75 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the extend position anywhere between 35 and 110 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full stroke length.

The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke110 mm
Adjustable range35 – 110 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×110Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75 Is Used

precision_manufacturing

Machining Center Clamps

Dial the extend stop between 35 and 110 mm to position workpiece clamps precisely for varying part lengths without machining custom spacers.

straighten

Press Fit Pins

Set the exact insertion depth for pressing pins into housings, relying on the fixed NBR bumper to absorb the end-of-stroke shock during repetitive cycles.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75 the Right Cylinder?

Stepping down, the SDAJ25 yields 245.4 N; stepping up, the SDAJ40 provides 628.3 N.

Choose this unit when your fixture requires frequent on-site stroke tuning within the 75 mm window. Note that a plain cylinder does not hold its load if air pressure drops or the valve centers; the piston drifts. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for bore, 110 mm max stroke, 75 mm window, PT1/8 port, female rod thread, and the lack of a piston magnet.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–110 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75 FAQ

The theoretical maximum push is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

Turning the M10x1.25 R screw shortens the extend end position by up to 75 mm, giving a usable extend range of 35 to 110 mm. The screw acts only as a mechanical stop at the end of the stroke; it does not lock the piston mid-stroke or hold the load if air pressure is lost.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X110-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.