
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X130-30 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the forward stroke down by up to 30 mm, yielding a usable extend range of 100 to 130 mm directly on the machine without shims or part swaps.
Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. The bore is hard-anodized and uses a fixed NBR bumper at each end to decelerate the stroke end; this is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 130 mm |
| Adjustable range | 100 – 130 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 100 to 130 mm during fixture swaps to accommodate varying part depths without machining new spacers.
Trial different extend endpoints in 1 mm increments via the M10x1.25 adjuster to find the exact kinematic position for a new assembly.
Choose this model when your fixture requires exact forward positioning during commissioning or frequent product changeovers.
Confirm the 32 mm bore, 130 mm maximum stroke, 30 mm adjustment window, and PT1/8 port. This unit has a female M6x1.0 rod-end thread and no magnet. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end of travel. For a locked load without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed is 30-500 mm/s.
Turning the external R (M10x1.25) screw shortens the forward end position by up to 30 mm, giving an extend range of 100 to 130 mm. The retract stroke remains full. This specific SKU has no piston magnet and cannot take a switch; you must select the -S variant to use reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.