
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-50B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X130-50B is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. It features a male-threaded M10x1.25 piston rod and an external R (M10x1.25) adjuster screw. By turning this screw, you can shorten the extend stroke on-site across a 50mm window, yielding a usable extend range of 80 to 130mm without changing parts. Retract remains full, and the short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.
The unit relies on a fixed NBR bumper at each end to decelerate the stroke end; it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 130 mm |
| Adjustable range | 80 – 130 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M10x1.25 rod end position on the fly to accommodate varying box depths on a changeover-heavy packaging line.
Stepping down to an SDAJ25 yields 245.4 N, whereas stepping up to an SDAJ40 provides 628.3 N. This makes the cylinder ideal for moderate payload manipulation.
Choose this model if your machine commissioning requires frequent on-site stroke tuning across the 80-130mm extend band. It features a PT1/8 port and a male M10x1.25 rod thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates at 30-500 mm/s within a 0.15-1.0 MPa pressure range.
The external R (M10x1.25) screw mechanically shortens the extend stop by up to 50mm, giving an 80-130mm usable range without changing force. This specific SKU has no piston magnet and cannot take a switch; you must specify the -S option for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.