
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X15-20SB is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjuster screw that dials the extend stop down to 0 mm, providing on-machine tuning without shims or part swaps.
Its short riveted body minimizes axial mounting depth where space is tight. This specific build includes a male M10x1.25 piston rod thread and a built-in magnet for position sensing. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 15 mm |
| Adjustable range | 0 – 15 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-15 mm extend stop during prototype runs to find the optimal push point for a 20.5 kg vertical lift before locking the M10x1.25 adjuster.
Fit the compact riveted body into tight machine cells to push parts using the male rod end, saving axial footprint where larger profile cylinders fail.
This configuration is ideal for operators needing frequent on-site stroke adjustments between 0 and 15 mm. It includes the -S magnet for AirTAC reed or electronic switches and the -B male M10x1.25 rod end. Note that a plain cylinder does not hold position on air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The included -S magnet allows tracking of the piston position using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.