
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X20-10S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X20-10S is a compact double-acting double-rod cylinder featuring an on-site extend stop. By turning the external M10x1.25 adjuster screw, you set the forward end position anywhere between 10 and 20 mm without changing parts.
Its short riveted body minimizes axial mounting depth where space is tight. The unit relies on a fixed NBR bumper to absorb end shocks and is not an adjustable air cushion. Equipped with a built-in magnet (-S), it supports AirTAC reed or electronic solid-state switches for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X20-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 20 mm during machine changeovers to accommodate different part heights without machining new spacers.
Fine-tune the forward endpoint on the fly during initial fixture setup, finding the exact 15 mm contact point before locking the screw.
Choose this model if your fixture requires frequent trial positioning or changeover. Remember that a standard cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the mechanical stop is not a lock. For secure load holding without live pressure, add an external rod lock or pilot-operated check valve. Configuration confirmed: 32 mm bore, 20 mm stroke, 10 mm window, PT1/8 port, female M6x1.0 rod thread, -S magnet.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The M10x1.25 screw shortens the extend stroke by up to 10 mm, giving a usable 10 to 20 mm range. The built-in -S magnet allows use of AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.