
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-40SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X40-40SB is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. By turning the external M10x1.25 adjuster screw, you can dial the extend position anywhere between 0 and 40 mm without changing parts.
This thin riveted-body design drastically reduces axial mounting depth, fitting easily into tight machine envelopes where larger profile cylinders cannot. The unit includes a built-in piston magnet for AirTAC reed or electronic switches, and a male M10x1.25 threaded rod end for direct mounting. End-of-stroke shock is managed by a fixed NBR bumper which decelerates the piston, though it is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X40-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 40 mm |
| Adjustable range | 0 – 40 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-40 mm extend stop during prototype runs to find the optimal contact point before locking down the sequence.
Swap product families rapidly by turning the M10x1.25 adjuster screw to meet new part dimensions without swapping the entire actuator.
Dropping down to the SDAJ25 yields 245.4 N, whereas stepping up to the SDAJ40 provides 628.3 N.
This specific model is ideal for operators needing frequent on-machine stroke tuning during changeovers. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Configuration confirmed: 32 mm bore, 40 mm stroke, 40 mm adjust window, PT1/8 port, -S magnet, and -B male rod thread.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The external M10x1.25 screw shortens the extend stroke by up to 40 mm, giving a usable extend range of 0 to 40 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.