verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke50 mm
  • Adjustable range30–50 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$48.82 $56.32Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB

The AirTAC SDAJ32X50-20SB is a compact double-acting double-rod cylinder built for on-site extend-position tuning. An external M10x1.25 adjuster screw lets you dial the forward stop anywhere between 30 and 50 mm, eliminating the need for shims or part swaps during changeovers.

This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, and a male M10x1.25 piston rod (-B) for secure external attachment. The short riveted body saves valuable axial mounting depth in tight machinery, while a fixed NBR bumper decelerates the piston at the end of travel. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke50 mm
Adjustable range30 – 50 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×50Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 30 to 50 mm via the M10x1.25 screw to accommodate different part lengths on a machining line without swapping cylinders.

straighten

Press Fit Alignment

Use the male M10x1.25 rod to secure a fitting jig, adjusting the mechanical stop to press bearings to exact depths without over-travel.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB the Right Cylinder?

Choose the SDAJ32X50-20SB specifically for setups requiring frequent forward-position adjustments across a 30 to 50 mm window. It features a PT1/8 port, a male M10x1.25 rod thread, and a magnetic piston. Note that the fixed NBR bumper only decelerates the stroke end; it does not lock the load. If your application requires position holding without live air pressure, you must integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB FAQ

The theoretical maximum push force is 82 kgf at 1.0 MPa.

The R (M10x1.25) screw shortens the extend stroke by up to 20 mm, yielding a usable 30 to 50 mm range without changing force. The built-in magnet (-S) allows you to mount AirTAC reed or electronic solid-state switches directly into the body grooves for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-20SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X50-20SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.