Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 50 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke50 mm
- Adjustable range10–50 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B
The AirTAC SDAJ32X50-40B is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. A front R thread M10x1.25 adjustment screw lets you shorten the outward stroke on-site across a 10 to 50 mm window, removing the need for shims or part swaps during changeovers.
This specific SKU features a male M10x1.25 piston rod thread and a 12 mm rod diameter, operating via a PT1/8 port. The short riveted body drastically reduces axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and this base configuration lacks a piston magnet, meaning magnetic switches cannot be fitted unless you specify the -S variant.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 50 mm |
| Adjustable range | 10 – 50 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B Is Used
Tooling Depth Calibration
Dial in the exact clamping depth on machining fixtures using the R screw, adjusting the extend stop between 10 and 50 mm without swapping cylinders.
Changeover Adjustment
Speed up product family changeovers on packaging lines by turning the M10x1.25 adjuster to set new outward positions on the fly.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B the Right Cylinder?
When sizing this 32 mm bore, evaluate your force requirements against its neighbours.
Choose this male-rod (-B) configuration if your tooling requires an externally threaded M10x1.25 attachment point. The 40 mm adjustment window is ideal for machines needing frequent trial positioning. Remember that a standard cylinder does not hold position upon air loss or valve centering; the piston drifts, and the fixed bumper only decelerates near the end. For suspended loads, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 10–50 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B FAQ
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R M10x1.25 screw shortens the extend stroke by up to 40 mm, allowing usable outward travel from 10 to 50 mm. This SKU includes a male M10x1.25 piston rod thread. Note that this non-S model lacks a piston magnet, so it cannot accept reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X50-40B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.