
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X65-20SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M10x1.25 adjuster screw lets you dial the forward stroke anywhere between 45 and 65 mm without changing parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 rod thread. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 65 mm |
| Adjustable range | 45 – 65 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 65 mm to set exact clamping depth on machining fixtures, avoiding part deformation during initial setup.
Quickly reposition the male M10x1.25 rod end for varying package sizes on a packaging line, cutting retooling time from minutes to seconds.
When sizing this 32 mm bore, evaluate your thrust requirements against neighboring options.
Choose this configuration if your fixture requires exact forward positioning during commissioning or frequent changeovers. Confirm your parameters: 32 mm bore, 65 mm maximum stroke, 20 mm adjust window, PT1/8 port, male M10x1.25 rod, and the -S magnet. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and does not lock the load. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The external M10x1.25 screw shortens the forward stroke by up to 20 mm, giving a usable range of 45 to 65 mm. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.