
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X65-40B is a compact double-acting double-rod cylinder featuring an external extend stop. A front R (M10x1.25) screw lets you dial the forward end-position between 25 and 65 mm directly on the machine.
This specific SKU includes a male-thread M10x1.25 piston rod for direct tooling attachment and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X65-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 65 mm |
| Adjustable range | 25 – 65 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop across the 25-65 mm window to find the exact contact point for prototype parts before locking the tooling down.
Turn the M10x1.25 adjuster to shift the male rod endpoint instantly when switching packaging lines between different carton depths.
Set the mechanical stop to push varied product lengths from a single station without swapping out the entire actuator body.
Choose this unit when you need on-site stroke tuning during frequent changeovers.
This configuration specifies a 65 mm maximum stroke, a 40 mm adjustment window, a PT1/8 port, no magnet, and a male M10x1.25 rod thread. Remember that a plain cylinder does not hold position on air loss or valve centering; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum is 82 kgf at 1.0 MPa.
Turning the external R (M10x1.25) screw shortens the extend stroke by up to 40 mm, giving a usable forward range of 25 to 65 mm. The retract stroke remains full. Note that this SKU lacks the -S magnet, so it cannot support position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.