
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-75SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X70-75SB is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjustment screw that dials the extend stop from 0 to 70 mm directly on your machine. The short riveted body drastically reduces axial mounting depth, fitting easily where round-body alternatives will not.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and a male M10x1.25 piston rod end (-B). End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 70 mm |
| Adjustable range | 0 – 70 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 0 and 70 mm via the M10x1.25 screw to set new jaw depths during product family changeovers without machining new spacers.
Adjust the extend endpoint on the fly for different carton heights, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach impact without damaging the box.
Choose this unit if your fixture requires frequent on-site stroke tuning or trial positioning without swapping shims.
Confirm your parameters: 32 mm bore, 70 mm maximum stroke, 75 mm adjustment window, PT1/8 air port, -S magnet for sensing, and -B male M10x1.25 rod thread. Remember that a plain compact cylinder does not hold its load if air pressure drops or the valve centres—the piston will drift. For suspended or gravity-loaded applications, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a temperature range of -20 to +70 C.
Turning the external R (M10x1.25) screw shortens the extend endpoint by up to 75 mm, giving a usable extend range of 0 to 70 mm. This sets a mechanical stop and does not alter the cylinder's force. The built-in magnet (-S) allows you to mount AirTAC reed or electronic solid-state switches directly into the body sensor grooves for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.