
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X80-50S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The SDAJ32X80-50S is a double-acting compact cylinder featuring a 32mm bore and an external extend stop. An M10x1.25 adjuster screw lets you dial the forward stroke down from 80mm to 30mm directly on the machine, eliminating the need for shims or part swaps.
Its short riveted body significantly reduces axial mounting depth where a larger profile cylinder will not fit. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the piston without acting as a lock. Equipped with a built-in piston magnet, this unit supports AirTAC reed or electronic switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X80-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 80mm during fixture swaps to accommodate varying part heights without machining new spacers.
Use the M10x1.25 adjuster to test multiple extend endpoints during R&D trials, locking in the exact 30-80mm travel required.
When sizing this unit, consider the neighboring bores.
Choose this specific model if your application requires frequent on-machine stroke tuning between 30mm and 80mm. It features a PT1/8 port, a 12mm rod, and a female M6x1.0 rod-end thread. The included -S magnet enables switch sensing. Remember that a plain cylinder cannot hold a load if air pressure drops; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.7MPa the push is 563N and pull is 483.8N. The theoretical maximum push is 82kgf at 1.0MPa.
The M10x1.25 screw shortens the forward stroke by up to 50mm, allowing usable extensions between 30mm and 80mm. The built-in -S magnet works with AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.