
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X80-50SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X80-50SB is a compact double-acting double-rod cylinder built for on-site extend positioning. An external M10x1.25 adjuster screw lets you dial the outward stop anywhere between 30 and 80 mm, eliminating shims or part swaps during changeovers.
This thin riveted-body design saves valuable axial mounting depth where round-body or profile units will not fit. It includes a built-in piston magnet for AirTAC reed or electronic switches and features a male M10x1.25 piston rod end. End-of-travel shock is absorbed by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X80-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 30 to 80 mm extend stop on the fly using the M10x1.25 screw to accommodate different product widths without disassembling the tooling.
Use the male M10x1.25 rod end to mount probes or locators, fine-tuning the outward reach safely within the 241 N working load limit.
When sizing this 32 mm bore, look at both adjacent options. Stepping up, the SDAJ40 yields 628.3 N at 0.5 MPa, offering a substantial leap in force if your fixture demands it.
Choose this specific configuration if your machine requires frequent trial positioning or rapid format changes. The 50 mm adjustment window is ideal for dialing in exact end stops without swapping cylinders. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This unit confirms a 32 mm bore, 80 mm stroke, 50 mm window, PT1/8 port, an -S magnet, and a male -B rod thread.
Quick checklist
At 0.7 MPa, push increases to 563 N and pull to 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.
The external M10x1.25 screw shortens the extend stroke by up to 50 mm, providing a usable range of 30 to 80 mm. The included -S magnet allows tracking via AirTAC reed or electronic switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.