
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-40SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X90-40SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the forward stroke down by up to 40 mm directly on the machine, yielding a usable extend range of 50 to 90 mm without swapping shims or parts.
The short riveted body saves valuable axial mounting depth where a round-body or profile cylinder will not fit. This specific configuration includes a male-thread piston rod (M10x1.25) for secure tooling attachment and a built-in piston magnet for position sensing. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 50-90 mm extend stop on machining fixtures to compensate for cutter wear, using the M10x1.25 adjuster screw to maintain precise clamp depth without fabricating new spacers.
Rapidly reposition the extend endpoint for different product sizes on a packaging conveyor, leveraging the 40 mm adjustment window to cut setup time between batches.
This model is ideal for operators needing frequent on-site stroke tuning during changeovers. Confirm your specs: 32 mm bore, 50-90 mm adjustable forward travel, PT1/8 port, -S magnet for reed or electronic switches, and -B male rod end. Note that a plain cylinder does not hold a load if air pressure drops or the valve centres; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed of 30-500 mm/s.
The R (M10x1.25) screw mechanically shortens the extend endpoint by up to 40 mm, giving a 50-90 mm range, but it does not alter force or lock mid-stroke. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.