
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X110-10B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M12x1.25 adjuster screw lets you dial the outward stroke anywhere from 100 to 110 mm without changing parts, while the retract remains full length.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. This specific SKU includes a male M14x1.5 piston rod end for direct tooling attachment and lacks a piston magnet, meaning it cannot accept reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 110 mm |
| Adjustable range | 100 – 110 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 100-110 mm extend stop on the shop floor to perfectly seat casting clamps against varying part tolerances without machining new spacers.
Utilize the male M14x1.5 rod end to mount a folding blade, making minute 10 mm adjustments to the extend position as box sizes changeover on the line.
Choose this specific unit when your fixture requires a male M14x1.5 rod thread and minor 100-110 mm extend tweaking during setup.
Remember that a standard cylinder does not hold position upon air loss or valve centering; the piston will drift. The fixed NBR bumper only decelerates the stroke near the end and the R screw acts as a stop, neither functions as a lock. For suspended or gravity-loaded applications requiring hold without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the PT1/8 port, 30-500 mm/s speed range, and the absence of a sensing magnet before ordering.
Quick checklist
It operates between 0.15 and 1.0 MPa, handles temperatures from -20 to +70 C, and runs at speeds of 30-500 mm/s.
Turning the external M12x1.25 screw shortens the extend stroke by up to 10 mm, giving a usable range of 100 to 110 mm while leaving retract unaffected. This SKU has no piston magnet, so it cannot accept magnetic switches; you would need the -S variant to enable reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.