
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-100S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-100S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M12x1.25 adjuster screw, you can dial the forward stroke anywhere from 20 to 120 mm directly on the machine, eliminating the need for shims or part swaps during setup. Retract travel remains full length.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. This specific unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body sensor grooves.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 20 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 120 mm via the M12x1.25 screw to clamp varying part heights on a single fixture without machining new spacers.
Rapidly reposition the extend endpoint during product family changeovers, using the 100 mm adjustment window to cut setup time and eliminate mechanical part swaps.
Choose this 100 mm window model if your application requires extensive on-site stroke tuning or trial positioning between 20 and 120 mm.
Confirm the bore, 120 mm max stroke, 100 mm adjust window, and PT1/8 air port match your pneumatic layout. The piston rod is Ø16 mm with a female M8x1.25 rod-end thread. Since this variant carries the -S magnet code, it supports AirTAC reed or solid-state sensors. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
The external M12x1.25 screw shortens the extend stroke by up to 100 mm, allowing usable forward travel between 20 and 120 mm. The -S suffix denotes a built-in piston magnet for tracking position with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.