
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-10SB is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the M12x1.25 adjuster screw lets you dial the outward stroke from 110 to 120 mm directly on the machine, avoiding part swaps during changeovers.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod. The short riveted body minimizes axial mounting depth where space is tight. End shock is absorbed by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 110 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 110-120 mm extend stop during fixture swaps to accommodate varying part heights without machining new spacers.
Lift a 32 kg payload using the male M14x1.5 rod, relying on the fixed NBR bumper to soften the final approach.
If your application requires less force, the adjacent SDAJ32 provides 402.1 N at 0.5 MPa; for heavier demands, the SDAJ50 yields 981.7 N at 0.5 MPa.
This model is ideal for setups requiring on-site stroke tuning between 110 and 120 mm. Confirm the PT1/8 port, the male M14x1.5 rod thread, and the included magnet. Note that a plain cylinder drifts when air is lost or a valve centers; the bumper only decelerates near the end, so use an external rod lock or pilot-operated check valve for load holding.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend stop by up to 10 mm, giving a usable range of 110-120 mm. The included magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.