
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-30 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-30 is a compact double-acting double-rod cylinder featuring an external extend stop. A front M12x1.25 adjustment screw lets you dial the extend position anywhere between 90 and 120 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot accept magnetic switches; you would need the -S option for reed or electronic sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 90 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 90 to 120 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Set precise material contact points during trial bends, leveraging the 32 kg vertical lift capacity to position heavy gauges accurately.
When sizing this 40 mm bore, evaluate your force requirements against its neighbours. Choose the 40 mm bore if your application sits squarely in that performance band.
Opt for the SDAJ40X120-30 when your fixture requires exact on-site stroke tuning across a 30 mm window. It features a PT1/8 port, a 16 mm rod, and a female M8x1.25 rod-end thread. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper and mechanical stop do not serve as a lock. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 879.6 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the M12x1.25 adjuster screw shortens the extend end position by up to 30 mm, giving a usable extend range of 90 to 120 mm. The retract stroke remains full, and the screw only sets the stop position without altering the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.