verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 120 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke120 mm
  • Adjustable range45–120 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$97.21 $104.71Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S

The AirTAC SDAJ40X120-75S is a compact double-acting double-rod cylinder featuring an external extend stop. A M12x1.25 adjustment screw lets you dial the extend position anywhere between 45 and 120 mm directly on your machine, eliminating shims or part swaps during changeovers.

Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders will not fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. The included -S piston magnet supports AirTAC reed or electronic switches for position sensing.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke120 mm
Adjustable range45 – 120 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×120Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop between 45 and 120 mm via the M12x1.25 screw to adapt a 628.3 N press station to new part heights without machining new spacers.

packaging

Carton Flap Folding

Fine-tune the 40 mm bore rod extension on-site to tuck varying box flaps, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach impact.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S the Right Cylinder?

Choose this specific model if your fixture setup requires frequent trial positioning or on-machine stroke tuning across a 75 mm window.

Confirm the 40 mm bore, 120 mm maximum stroke, 75 mm adjust window, and PT1/8 port suit your manifold. This variant includes the -S magnet for sensing and a female M8x1.25 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–120 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S FAQ

The theoretical maximum force is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

The -S code denotes a built-in piston magnet for use with AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X120-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.