
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-40S is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the R (M12x1.25) screw lets you dial the extend position anywhere between 90 and 130 mm directly on your equipment, eliminating the need for shims or part swaps.
Its short riveted body drastically saves axial mounting depth where a round-body or profile cylinder will not fit. The piston rod measures 16 mm with a female M8x1.25 rod-end thread, and end-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Equipped with a built-in magnet (-S), this unit supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 90 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site to fold different box heights on a packaging line, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach impact.
Fine-tune the backgauge position in 40 mm increments during trial bends, ensuring the 16 mm rod hits the exact metal flange location before the full 130 mm extend.
Choose this specific model if your fixture requires frequent on-machine stroke tuning across a 40 mm window.
Confirm your parameters: 40 mm bore, 130 mm maximum stroke, 40 mm adjust window, PT1/8 port, built-in magnet, and female M8x1.25 rod thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The built-in -S magnet works with AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.