
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X20-10SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R thread lets you dial the extend end-position down from the 20mm maximum to a 10mm minimum directly on your machine, eliminating the need for shims or part swaps during changeovers.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod end. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M12x1.25 adjuster screw to accommodate different part heights on a shared fixture, cutting setup time between product batches.
Set the male M14x1.5 rod extension precisely for carton folding or light pressing tasks where a fixed 20 mm stroke would crush the material.
Choose this specific model if your fixture setup requires frequent on-site stroke tuning between 10 and 20 mm.
Confirm the 40 mm bore, 20 mm stroke, 10 mm adjust window, and PT1/8 port match your pneumatic layout. This SKU includes the -S magnet for position sensing and the -B male M14x1.5 rod thread. Remember that a plain cylinder does not hold a load when air is lost or the valve is centered; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The external R screw shortens the extend stroke by up to 10 mm, giving a usable range of 10 to 20 mm. The included -S magnet works with AirTAC reed or electronic switches mounted in the body grooves for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.