
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X30-10 is a double-acting compact cylinder featuring a 40mm bore and a 30mm extend stroke that can be mechanically shortened on-site. Turning the external M12x1.25 adjuster screw lets you set the extend stop anywhere between 20 and 30mm, eliminating the need for shims or part swaps during machine commissioning.
Built with a short riveted body, this unit saves axial mounting depth where a longer cylinder would fail to fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Operating speed ranges from 30-500mm/s, and this specific SKU ships without a piston magnet, meaning magnetic switches cannot be used unless upgraded to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Use the M12x1.25 screw to dial the extend stop between 20 and 30mm, ensuring exact tooling clearance on machining fixtures without fabricating custom spacers.
Fit the compact riveted body into tight assembly stations where axial space is restricted, using the 20-30mm stroke window to clamp delicate components precisely.
Choose this model if your fixture requires precise on-machine stroke tuning to dial in a final end position.
Confirm your parameters: 40mm bore, 30mm nominal stroke, 10mm adjust window, PT1/8 port, female M8x1.25 rod thread, and no magnet. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
Operating pressure is 0.15-1.0MPa, proof pressure is 1.5MPa, and speed ranges from 30-500mm/s.
The external M12x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 30mm maximum down to 20mm. It does not alter the force output, nor does it lock the piston; the cylinder cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.