Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
- BoreØ40 mm
- Max stroke35 mm
- Adjustable range0–35 mm
- Adjuster threadM12×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B
The AirTAC SDAJ40X35-40B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M12x1.25 screw lets you dial the outward stroke on-site from 0 up to 35 mm without swapping shims or parts, while the retract motion remains full length.
Built with a short riveted body, this unit saves axial mounting depth where a longer cylinder would not fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion or a lock. This specific SKU includes a male M14x1.5 piston rod thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches without the -S option.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B Is Used
Tooling Changeover
Dial the extend stop from 0 to 35 mm on the machine to match different fixture heights during production line changeovers without machining new spacers.
Press Fit Tuning
Fine-tune the 0-35 mm extend position to set precise insertion depths for pins or bearings, using the male M14x1.5 rod to mount custom tooling.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B the Right Cylinder?
Choose this model for setups requiring frequent on-site stroke tuning during changeovers. Confirm your requirements for the 40 mm window, PT1/8 port, and male M14x1.5 rod. Note that a plain cylinder does not hold its load on air loss or when a valve is centered—the piston drifts. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–35 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M12×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B FAQ
The M12x1.25 adjuster screw shortens the extend stop by up to 40 mm, yielding a usable 0-35 mm outward range. It acts purely as a mechanical stop and does not change force. The cylinder cannot hold a load on air loss; use an external rod lock for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.