
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-40SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X40-40SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop from 0 to 40 mm directly on your machine. This thin riveted body saves valuable axial mounting depth where larger profile or round-body units cannot fit.
Equipped with a built-in piston magnet (-S) for AirTAC reed or electronic switches, and a male M14x1.5 threaded rod end (-B), it handles varied tooling mounts. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 40 mm |
| Adjustable range | 0 – 40 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-40 mm clamping depth on machining fixtures using the M12x1.25 screw, accommodating varying raw material thicknesses without fabricating custom spacers.
Set a precise mechanical bottoming position for light bending tasks; the fixed NBR bumper absorbs the end shock while the male M14x1.5 rod securely mounts the tooling.
Choose this specific model when your fixture requires on-site stroke tuning between 0 and 40 mm, a male M14x1.5 rod end, and position sensing.
Confirm your parameters match the 40 mm bore, 40 mm maximum stroke, 40 mm adjustment window, PT1/8 port, -S magnet, and -B male thread. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a mid-stroke lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 40 mm, giving a usable extend range of 0-40 mm while retract remains full stroke. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.