
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X50-20 is a compact double-acting cylinder with an external M12x1.25 adjustment screw that lets you dial the extend stop down from 50 mm to 30 mm directly on the machine. The short riveted body minimizes axial footprint where space is tight.
End-of-travel deceleration relies on a fixed NBR bumper at each end, not an adjustable air cushion. This SKU ships without a piston magnet, so it cannot host reed or electronic switches; order the -S variant if you require position sensing. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 30 and 50 mm to seat clamps precisely on variable-width billets without re-shimming the fixture.
Set the mechanical stop via the M12x1.25 screw to control insertion depth for delicate bearings, preventing over-travel during assembly changeovers.
Choose this specific 20 mm adjustment window if your fixture requires frequent changeovers or trial positioning between 30 and 50 mm. Note that a plain SDAJ does not hold position on air loss or valve centering—the bumper only decelerates near the end. For suspended loads, integrate an external rod lock or pilot-operated check valve. Confirm your port is PT1/8, the rod end is female M8x1.25 (or male M14x1.5 if coded B), and that no magnet is present.
Quick checklist
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 20 mm, giving a usable range of 30 to 50 mm. The screw acts only as a mechanical stop and does not alter force. The cylinder cannot hold a load if air pressure is lost; use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.