
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X50-30SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop directly on your machine. You can set the outward stroke anywhere between 20 and 50 mm without swapping shims or parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 threaded rod end. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 50 mm |
| Adjustable range | 20 – 50 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 50 mm during machine changeovers to accommodate varying part widths without fabricating new spacers.
Use the 32 kg vertical lift capacity to probe and set optimal clamping depth on test assemblies before locking the final position.
Stepping down to an SDAJ32 yields 402.1 N, while moving up to an SDAJ50 provides 981.7 N.
This model is ideal for setups requiring frequent on-site stroke tuning or changeovers. Remember that a plain cylinder does not hold position if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your requirements for the 40 mm bore, 50 mm maximum stroke, 30 mm window, PT1/8 port, -S magnet, and -B male rod thread.
Quick checklist
The M12x1.25 screw shortens the extend end by up to 30 mm, yielding a usable 20-50 mm range. The built-in magnet (-S) allows tracking via AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.