verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke60 mm
  • Adjustable range30–60 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$54.19 $61.69Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30

The AirTAC SDAJ40X60-30 is a compact double-acting double-rod cylinder featuring an external extend stop. A M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 30 and 60 mm directly at the machine, eliminating the need for shims or part swaps during changeovers. The short riveted body conserves axial mounting depth where a longer profile unit would fail to fit.

End shock is managed strictly by a fixed NBR bumper, which decelerates the piston rather than acting as a lock. This specific SKU lacks a piston magnet, so it cannot support position sensing without upgrading to the -S variant.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke60 mm
Adjustable range30 – 60 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×60Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30 Is Used

precision_manufacturing

Machining Clamp Depth

Dial the extend stop from 30 to 60 mm to set exact clamping depth on machining fixtures, preventing over-travel on varied part heights.

packaging

Carton Flap Folding

Fine-tune the push rod endpoint during size changeovers to fold packaging flaps accurately without crushing the corrugated board.

vertical_align_center

Vertical Lift Stops

Limit the upward travel of a 32 kg lift payload safely, using the mechanical stop to define the precise upper position.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30 the Right Cylinder?

When sizing this unit, look at the adjacent bores for your thrust needs. Choose this bore if your setup-heavy line requires frequent on-machine stroke tuning within the 30 to 60 mm window.

Confirm your parameters: 40 mm bore, 60 mm maximum stroke, 30 mm adjustment window, PT1/8 air port, female rod-end thread, and no magnet. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers; the piston drifts. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30 FAQ

The theoretical maximum push force is 128 kgf at 1.0 MPa.

Turning the M12x1.25 external screw shortens the extend endpoint by up to 30 mm, giving a usable outward stroke range of 30 to 60 mm. The retract stroke remains full, and the screw sets the stop position without changing the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X60-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ40X60-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.