
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-50 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X80-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front R (M12x1.25) screw lets you dial the outward stroke down from the 80 mm maximum to as low as 30 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X80-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 mm down to 30 mm to accommodate different casting widths on a milling fixture without machining new spacers.
Set precise intermediate lifting heights up to 80 mm; ensure external load holding since the NBR bumper decelerates but does not lock the 32 kg vertical load.
When sizing this 40 mm bore actuator, evaluate your force requirements against its neighbours.
Choose this model if your fixture setup requires frequent trial positioning or on-site stroke tuning between 30 and 80 mm. Confirm your porting matches the bore-fixed PT1/8 thread, and verify if you need the female M8x1.25 rod-end thread. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end, so integrate an external rod lock or pilot-operated check valve for load holding without live pressure.
Quick checklist
Turning the R (M12x1.25) screw mechanically shortens the extend stop anywhere between 30 and 80 mm; it does not alter force. It is not a mid-stroke lock, and the cylinder will drift if air is lost, so use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.