
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-75SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X85-75SB is a double-acting compact cylinder featuring an external R (M12x1.25) adjustment screw that dials the extend stop directly on your machine between 10 and 85 mm. This thin riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and a male M14x1.5 threaded rod end (-B) instead of the default female M8x1.25. End shock is handled by a fixed NBR bumper that decelerates the piston near the stroke limits, operating effectively across a 30-500 mm/s speed range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 10-85 mm extend stop during fixture changeovers to clamp raw castings of varying widths without swapping out cylinder hardware.
Set multiple precise upper stopping points for stacking operations, relying on the male M14x1.5 rod to securely mount custom lifting forks.
Choose this 40 mm bore when your application requires on-site stroke tuning during frequent changeovers. Confirm your requirements for the PT1/8 port, 10-85 mm adjust window, male M14x1.5 rod, and the included magnet.
Remember that a standard SDAJ does not hold position or maintain a load if air pressure drops or the directional valve is centred. The fixed NBR bumper only decelerates the stroke near its end, and the R screw acts strictly as a mechanical stop, never a mid-stroke lock. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
Turning the M12x1.25 R screw shortens the extend stroke anywhere from the full 85 mm down to 10 mm. The -S code indicates a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.