
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-30 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-30 is a compact double-acting double-rod cylinder featuring an external extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke down from the 90 mm maximum to 60 mm directly on the machine, eliminating the need for shims or part swaps.
This riveted-body design saves crucial axial mounting depth where round-body or profile cylinders will not fit. It runs on a 16 mm piston rod with a PT1/8 port, handling speeds from 30 to 500 mm/s. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet so it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Re-tune the outward stroke on the fly during product family changeovers, using the short riveted body to fit within tight transfer conveyor framing.
Set exact carton flap tuck positions between 60 and 90 mm, relying on the fixed NBR bumper to absorb the 30-500 mm/s motion impact at end of travel.
Stepping down, the SDAJ32 provides 402.1 N, which may underpower a heavy fixture; stepping up, the SDAJ50 delivers 981.7 N for high-mass payloads. This model suits setups requiring frequent on-site stroke tuning between 60 and 90 mm.
Confirm your specifications before ordering: 40 mm bore, 90 mm max stroke, 30 mm adjust window, PT1/8 port, female M8x1.25 rod-end thread, and no magnet. Note that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the external R (M12x1.25) screw mechanically shortens the extend end-position from the 90 mm maximum down to 60 mm. The retract stroke remains full, and the screw acts purely as a stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.