verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke90 mm
  • Adjustable range40–90 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$76.99 $84.49Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S

The AirTAC SDAJ40X90-50S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M12x1.25) screw lets you dial the extend position anywhere between 40 and 90 mm directly on the machine, eliminating the need for shims or part swaps.

Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. The unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, while a fixed NBR bumper at each end decelerates the stroke end. Note that this bumper is not an adjustable air cushion, and the cylinder does not hold position if air pressure is lost.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke90 mm
Adjustable range40 – 90 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×90Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S Is Used

precision_manufacturing

Machining Clamps

Dials the extend stop from 40 to 90 mm to secure raw castings of varying widths in a milling vise without machining custom spacer blocks.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S the Right Cylinder?

Choose this specific model if your fixture requires frequent on-machine stroke tuning across a 40 to 90 mm window.

Confirm the bore, 90 mm maximum stroke, 50 mm adjust window, and PT1/8 port match your pneumatic layout. This variant includes the -S magnet for position sensing and a female M8x1.25 rod-end thread. For load holding without live pressure, add an external rod lock or pilot-operated check valve, as the fixed bumper only decelerates near the end of travel and the adjuster acts as a mechanical stop, not a brake.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–90 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

The R (M12x1.25) screw mechanically shortens the extend end position from the 90 mm maximum down to 40 mm without changing the force. The built-in -S magnet allows you to track position using AirTAC reed or electronic switches along the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X90-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.