
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-75SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-75SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M12x1.25 adjuster screw, you can shorten the forward stroke on-site across a 15 to 90 mm window, eliminating the need for shims or part swaps during line changeovers. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.
This specific configuration includes a built-in piston magnet (-S) for position sensing with AirTAC reed or electronic switches, and a male-thread piston rod (-B, M14x1.5). End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT1/8 air port is fixed by the 40 mm bore.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 15 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 15 and 90 mm to position clamping heads on varied part fixtures without machining new spacers.
Set precise upper travel limits for lightweight lifts, ensuring the male M14x1.5 rod stops exactly where needed without bottoming out.
Choose this model if your fixture requires frequent on-machine stroke tuning across the 75 mm adjustment window.
Confirm the 40 mm bore, 90 mm maximum stroke, 75 mm adjust window, PT1/8 port, -S magnet, and -B male M14x1.5 rod thread meet your envelope. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 R screw shortens the extend stop by up to 75 mm, giving a usable 15-90 mm forward travel while retract remains full. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.