verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 110 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke110 mm
  • Adjustable range70–110 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$107.91 $115.41Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S

The AirTAC SDAJ50X110-40S is a compact double-acting double-rod cylinder engineered for on-site stroke tuning. An external M16x1.5 adjuster screw lets you dial the extend stop anywhere between 70 and 110 mm, eliminating the need for shims or part swaps during machine commissioning.

Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile or round-body cylinders cannot fit. The bore-fixed PT1/4 port and 20 mm piston rod handle robust dynamics, while the integrated -S piston magnet supports AirTAC reed or electronic solid-state switches for precise end-position detection. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the stroke ends but is not an adjustable air cushion.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke110 mm
Adjustable range70 – 110 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×110Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S Is Used

package_2

Carton Forming Stops

Adjust the mechanical stop on the fly for different box depths, ensuring precise forming without changing the cylinder body or shims.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S the Right Cylinder?

When sizing this model, evaluate your force requirements bidirectionally.

Choose this specific configuration if your fixture requires frequent changeovers or trial positioning within the 70 to 110 mm extend window. Confirm your setup requires the built-in magnet for switch sensing and the female M10x1.5 rod-end thread. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 70–110 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S FAQ

Turning the M16x1.5 R screw shortens the extend stroke by up to 40 mm, allowing on-machine tuning between 70 and 110 mm. The -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X110-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X110-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.