
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-40B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X120-40B is a compact double-acting double-rod cylinder built for applications requiring a precise extend endpoint. An external M16x1.5 adjustment screw lets you shorten the outward stroke by up to 40 mm directly on the machine, yielding a usable extension range of 80 to 120 mm without swapping shims or parts.
This model features a male-thread M18x1.5 piston rod end and a PT1/4 air port. Its short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning the stop absorbs shock but does not act as a mid-stroke lock or brake.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod outward position on the fly during size changeovers, ensuring the folding arm meets different box profiles accurately without changing hardware.
Choose this specific unit when your fixture demands on-site stroke tuning between 80 and 120 mm, and ensure you specify the male M18x1.5 rod thread for your mounting interface.
Note that this SKU lacks the -S magnet option, so it cannot accept AirTAC reed or electronic switches for position sensing. Furthermore, a standard compact cylinder does not hold its load if air pressure drops or the valve is centered—the piston will drift, and the fixed bumper only decelerates near the stroke end. For suspended or vertical loads requiring fail-safe holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 external screw shortens the extend endpoint by up to 40 mm, giving an adjustable range of 80 to 120 mm. It sets the mechanical stop position and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.