
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-40S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X120-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M16x1.5 adjuster screw, you can dial the extend position anywhere between 80 and 120 mm directly on the machine, eliminating the need for shims or part swaps. Retract remains full length, while the push force stays identical to a standard SDA of this bore, delivering about 981.7 N at 0.5 MPa.
This model includes a built-in piston magnet for AirTAC reed or electronic switches, fitting neatly into the body sensor grooves. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End shock is handled by a fixed NBR bumper that decelerates the piston near the stroke end, rather than relying on an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X120-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M16x1.5 screw to set the extend stop between 80 and 120 mm, ensuring a 981.7 N clamp force adapts to varying raw material thicknesses without part changes.
Adjust the extend position on the fly during size changeovers, using the fixed NBR bumper to absorb the end shock safely across different box dimensions.
Choose this specific model if your fixture requires frequent on-site stroke tuning across an 80 to 120 mm window.
Confirm the 50 mm bore, 120 mm maximum stroke, 40 mm adjust window, and PT1/4 port match your pneumatic layout. The -S magnet code supports position sensing, and the rod end features a female M10x1.5 thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 1374.4 N and pull to 1154.5 N. The theoretical maximum push is 200 kgf at 1.0 MPa.
The external R (M16x1.5) screw mechanically shortens the extend stroke by up to 40 mm, allowing usable end positions from 80 to 120 mm; it sets the stop and does not alter force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.