verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 110 to 130 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke130 mm
  • Adjustable range110–130 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$108.16 $115.66Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20

The AirTAC SDAJ50X130-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in M16x1.5 adjuster screw lets you dial the outward stroke down by up to 20 mm, providing a usable extend range of 110 to 130 mm directly at the machine without swapping shims or parts.

This model saves valuable axial mounting depth through its short riveted body, fitting where round-body or profile cylinders cannot. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches; choose the -S variant if you require position sensing.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke130 mm
Adjustable range110 – 130 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×130Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20 Is Used

conveyor_belt

Package Divert Stroke Tuning

Dial the 110-130 mm extend stop on-site to perfectly match varying box sizes on a packaging line without changing cylinder hardware.

factory

Press Tooling Changeover

Speed up machine changeovers by turning the external adjuster to set the exact extend depth for different press tooling, avoiding part swaps.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20 the Right Cylinder?

It is the right choice for setups requiring frequent on-site stroke tuning between 110 and 130 mm.

Confirm your parameters before ordering: a 50 mm bore, 130 mm maximum stroke with a 20 mm adjustment window, and a PT1/4 air port. This unit has a female M10x1.5 rod-end thread and no magnet. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 110–130 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20 FAQ

It operates at 30-500 mm/s, accepts 0.15-1.0 MPa input pressure, and functions in -20 to +70 C temperatures.

The external M16x1.5 screw acts as a mechanical stop that shortens the extend stroke by up to 20 mm, giving a usable range of 110 to 130 mm. It does not alter the output force. This specific SKU lacks a piston magnet; to use reed or electronic switches, you must select the -S magnet option.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X130-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.