
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-75 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X130-75 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 55 and 130 mm directly on your equipment, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.
The short riveted body saves axial mounting depth where larger profile cylinders will not fit, while a fixed NBR bumper decelerates the stroke end. Note this SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X130-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 130 mm |
| Adjustable range | 55 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 55-130 mm extend stop to secure varying part widths on a milling fixture without machining custom spacers.
Set precise upper travel limits for a 50 kg lift payload, using the adjuster screw to prevent overshoot while gravity acts on the rod.
When sizing this unit, evaluate both neighbouring bores.
Operators needing frequent on-site stroke tuning will benefit from the 75 mm adjustment window. Remember that a plain cylinder drifts when air is lost or the valve centres; the fixed bumper only decelerates near the end of travel and is not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 130 mm maximum stroke, 75 mm window, PT1/4 port, female M10x1.5 rod thread, and lack of magnet for this configuration.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the M16x1.5 external screw shortens the forward stroke by up to 75 mm, allowing usable extend lengths between 55 and 130 mm. This screw acts only as a mechanical stop and does not alter force or lock mid-stroke; the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.