
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X140-50 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 140 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X140-50 is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop from 90 to 140 mm directly on your machine. The short riveted body minimizes axial mounting depth where space is tight.
This unit relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion. Note that the 140 mm stroke exceeds the 130 mm standard maximum for a 50 mm bore, making this a non-standard, made-to-order configuration. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X140-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 140 mm |
| Adjustable range | 90 – 140 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×140 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 90 to 140 mm during prototype runs to find the exact contact point for varying workpiece geometries without machining new spacers.
Fine-tune the descent height of a 50 kg payload between product changeovers, relying on the fixed NBR bumper to absorb the impact at the end of the modified stroke.
Choose this specific bore if your setup requires on-site stroke tuning within the 50 mm window.
Confirm the 50 mm bore, 140 mm maximum stroke, 50 mm adjust window, PT1/4 port, and female rod-end thread (M10x1.5) match your mounting requirements. This SKU lacks a piston magnet and cannot accept sensing switches; select the -S variant if you need reed or electronic switch integration. Remember that a plain cylinder does not hold its load on air loss or valve centering—install an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 1374.4 N. The theoretical maximum push is 200 kgf at the maximum operating pressure of 1.0 MPa.
Turning the external M16x1.5 screw shortens the extend end-position by up to 50 mm, giving a usable extend range of 90 to 140 mm. The screw acts strictly as a mechanical stop and does not function as a mid-stroke lock; the cylinder will not hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.