
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 140 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X150-10S is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 140 to 150 mm without changing parts. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches.
Its riveted body saves axial mounting depth where longer profile cylinders will not fit, while a fixed NBR bumper decelerates the stroke end. Note that the 150 mm stroke exceeds the 130 mm standard maximum for this bore, making it a non-standard, made-to-order unit.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X150-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 150 mm |
| Adjustable range | 140 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly alter the stroke end by up to 10 mm on-site to accommodate different package sizes without swapping out the entire actuator body.
This model suits setups needing precise 140-150 mm extend tuning during frequent changeovers.
Confirm the 50 mm bore, 150 mm stroke, 10 mm window, and PT1/4 port. The -S magnet and female M10x1.5 rod thread are present. A plain cylinder drifts on air loss since the fixed bumper only decelerates near the end; utilize an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 screw shortens the extend stop by up to 10 mm (usable range 140-150 mm) without altering force. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.