
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X30-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X30-10S is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where round-body or profile cylinders cannot fit. An external M16x1.5 adjuster screw lets you dial the extend stop down from the nominal 30 mm to as low as 20 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke ends without acting as a lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X30-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 mm to 20 mm to clamp varying part thicknesses on a machining fixture without swapping hardware.
Fine-tune the 20-30 mm extend position on-site to perfectly fold packaging flaps of different heights during rapid line changeovers.
Choose this specific unit if your fixture requires on-site extend tuning within the 20-30 mm window.
Confirm your parameters: a 50 mm bore, 30 mm maximum stroke, 10 mm adjustment range, and a PT1/4 port. The -S suffix denotes the integrated magnet for sensing, and the rod end features a female M10x1.5 thread. Note that a plain cylinder does not hold its load upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 screw shortens the extend end position by up to 10 mm, giving a usable 20-30 mm range while retract remains full. The -S suffix provides a built-in magnet for AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.