
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-40 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X35-40 is a compact double-acting double-rod cylinder featuring an external M16x1.5 R screw that dials the extend stop down to 0 mm from the 35 mm maximum, providing exact on-site positioning without changing parts.
Its short riveted body minimizes axial mounting depth where larger profile cylinders cannot fit, while a fixed NBR bumper at each end decelerates the stroke end. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; choose the -S variant if position sensing is required.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 35 mm on the fly to accommodate different part lengths on a machining line without swapping out entire actuators.
Set precise extend endpoints during prototype assembly to find the optimal engagement distance before locking down a final mechanical position.
This unit is ideal for operators needing frequent on-machine stroke tuning during changeovers, but remember it does not hold position upon air loss or valve centering—the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 35 mm stroke, 40 mm window, PT1/4 port, female M10x1.5 rod thread, and lack of magnet before ordering.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the M16x1.5 R screw shortens the extend end position by up to 40 mm, meaning the usable extend range is 0 to 35 mm. The retract stroke remains full, and the adjuster acts strictly as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.