verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke40 mm
  • Adjustable range30–40 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$61.63 $69.13Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B

The AirTAC SDAJ50X40-10B is a double-acting compact cylinder featuring a male-thread M18x1.5 piston rod and an external extend stop. An M16x1.5 adjuster screw lets you dial the extend end-position down from the 40mm maximum to 30mm directly on your equipment, eliminating the need for shims or part swaps. Retract travel remains full length.

The short riveted body conserves axial mounting depth where a larger profile cylinder will not fit. End shock is managed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke40 mm
Adjustable range30 – 40 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×40Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B Is Used

straighten

Gauge Positioning

Dial the M16x1.5 screw to set the exact 30-40mm extend stop for a 50 kg vertical lift probe, allowing rapid changeover between part heights without swapping cylinders.

factory

Press Fit Tuning

Adjust the extend stop on the machine to find the optimal 30-40mm insertion depth for light press-fit operations, avoiding part changeovers during initial prototype runs.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B the Right Cylinder?

Choose this 50mm bore if your application requires that intermediate force level along with on-site extend tuning.

Confirm the 50mm bore, 40mm stroke, 10mm adjust window, PT1/4 port, and the male M18x1.5 rod thread for your mounting interface. This SKU lacks the -S magnet, so it cannot accept reed or electronic switches. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B FAQ

At 0.7 MPa, push increases to 1374.4 N. The theoretical maximum push is 200 kgf at 1.0 MPa.

The M16x1.5 screw shortens the extend stroke by up to 10mm, giving a usable range of 30-40mm. This SKU includes the -B option, meaning it has a male M18x1.5 piston rod thread instead of the default female thread. It does not have a piston magnet.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-10B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X40-10B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.