verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke45 mm
  • Adjustable range5–45 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$63.96 $71.46Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40

The AirTAC SDAJ50X45-40 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke down on the machine, yielding a usable extend range of 5 to 45 mm without swapping shims or parts.

Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, so for high kinetic energy you should slow the approach or add an external shock absorber. Note this specific SKU lacks a piston magnet and cannot host reed or electronic switches.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke45 mm
Adjustable range5 – 45 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×45Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40 Is Used

precision_manufacturing

Tooling Changeovers

Dial in the exact 5 to 45 mm extend position during machine setup, avoiding custom spacers when swapping part fixtures on a 50 kg rated line.

packaging

Flap Sealing Trial

Fine-tune the pressing depth on carton flaps without swapping cylinders, using the fixed NBR bumper to absorb the final impact.

vertical_align_center

Vertical Lift Stops

Set precise upper travel limits for a 50 kg lift application, knowing the M16x1.5 screw acts purely as a mechanical stop and not a mid-stroke lock.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40 the Right Cylinder?

When sizing this 50 mm bore, look at both adjacent options. Stepping down to the SDAJ40 drops the 0.5 MPa push force to 628.3 N, whereas stepping up to the SDAJ63 raises it to 1558.6 N.

Choose the SDAJ50X45-40 if your fixture requires frequent changeovers or trial positioning within that 5 to 45 mm extend window. Remember that a plain double-acting cylinder drifts when air is lost or the valve centres; the bumper and adjuster only manage the end stop, so fit an external rod lock or pilot-operated check valve if you need true load holding. This unit features a PT1/4 port, a 20 mm rod, and female M10x1.5 rod-end threading.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40 FAQ

The external M16x1.5 screw shortens the extend stop by up to 40 mm, giving an on-site adjustable outward range of 5 to 45 mm. The retract stroke remains full, and the mechanism does not alter the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X45-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.