
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
It features a short riveted body and an external M16x1.5 R-thread adjuster screw that lets you dial the extend stop down to 0 mm on the machine, providing precise 0-5 mm end-position tuning without swapping shims or parts.
This specific SKU includes a male M18x1.5 piston rod thread for direct mounting and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking brake. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod endpoint on the machine during product family changeovers, avoiding part swaps while maintaining exact 0-5 mm contact depth.
Choose this specific model if your fixture requires on-site extend tuning between 0 and 5 mm.
Confirm your parameters before ordering: a 50 mm bore, 5 mm maximum stroke with a 10 mm adjustment window, PT1/4 air port, and a male M18x1.5 rod thread (option B). Note that this SKU has no magnet (no S option), so position sensing is unavailable. A plain cylinder does not hold its load when air is lost or the valve is centered; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The adjustment screw does not alter these force outputs.
The external M16x1.5 screw shortens the extend stroke by up to 10 mm. Since the nominal stroke is 5 mm, you can dial the extend endpoint anywhere from 0 to 5 mm on the machine. The retract stroke remains full length, and the adjuster acts strictly as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.