
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X55-75S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X55-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke down to zero directly on the machine, providing a usable extend range of 0-55 mm without changing parts.
Its short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), this model supports AirTAC reed or electronic switches for precise end-position detection.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X55-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 55 mm |
| Adjustable range | 0 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the outward reach on the fly during format changeovers, relying on the fixed NBR bumper to absorb the impact of repeated high-speed cycles.
Set precise lifting heights up to 55 mm for 50 kg loads, using the M16x1.5 adjuster screw to mechanically limit the upward travel.
Choose this model if your application requires frequent on-machine stroke tuning between 0 and 55 mm.
Confirm the bore, 55 mm nominal stroke, 75 mm window, and PT1/4 port. The -S magnet is present for sensing, and the rod-end thread is female M10x1.5. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 screw shortens the extend stop by up to 75 mm, yielding a usable extend range of 0-55 mm; retract remains full. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.