
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-10 is a double-acting compact cylinder featuring an external M16x1.5 R thread adjuster screw. This mechanism lets you dial the extend end-position anywhere between 60 and 70 mm directly on the machine, avoiding shims or part swaps during commissioning. The retract stroke remains full length.
The short riveted body saves axial mounting depth where a larger profile cylinder will not fit, while a fixed NBR bumper decelerates the stroke end. Note this SKU lacks a piston magnet and cannot accept sensing switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 60 and 70 mm to align new gripper tooling on machining lines without fabricating custom spacers.
Fine-tune the folding arm position on packaging equipment to accommodate varying box heights while maintaining 981.7 N of extend force.
Choose this specific model if your fixture requires on-site stroke tuning within that 60-70 mm extend window.
Confirm the bore, 70 mm maximum stroke, 10 mm adjust window, and PT1/4 port match your pneumatic layout. This configuration ships without a magnet (no -S) and has a female M10x1.5 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or valve centred; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the external M16x1.5 R screw shortens the extend end-position by up to 10 mm, yielding a usable extend range of 60 to 70 mm. The screw acts purely as a mechanical stop and does not alter the output force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.